Renegade Miata Club Forum
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Miata parts spring cleaning

Go down

Miata parts spring cleaning Empty Miata parts spring cleaning

Post  KoneCrusher Sun May 31, 2009 8:42 pm

#1 -- Flyin' Miata turbo exhaust for NB, all stainless steel construction, designed for near zero back pressure for
turbocharged Miatas for quick spool-up, though can be used on any NB (1999-2005) Miata. Exhaust has 2.5" pipe with 3"
polished double-wall tip. Very high quality construction, installed on the car for only a few months, looks like new. Will
also fit Mazdaspeed MX-5 turbo cars, although the tip won't stick out quite as far as stock. $300
http://farm4.static.flickr.com/3633/3498108005_c7ba781f25_o.jpg
http://farm4.static.flickr.com/3584/3498947364_4443fcd368_b.jpg
http://farm4.static.flickr.com/3652/3498134327_6a4041c68b_b.jpg
http://farm4.static.flickr.com/3347/3498946942_99d7b8e931_b.jpg

#2 -- Tie rod ends from '99 Miata (P/N NA01-32-280), removed from car at 38K mi (summer car, no rust), excellent condition,
replaced with tie rod ends from different year for lowered car. $60 for the pair
http://farm4.static.flickr.com/3608/3583646366_5c4470b54c_b.jpg

#3 -- Front sway bar for NA. $5

#4 -- Original Mazda radiator cap, removed to install 16 psi cap, works fine. $5

#5 -- PBR/Axxis Metal Master (XBG) semi-metallic front brake pads (D1185RM) for '90-01 Miata (new). $35
http://farm4.static.flickr.com/3311/3583663944_16910a36dc_b.jpg

#6 -- Two sets of 15x6 '99 Miata Sport wheels, these are the lightweight (13 lb) 5-spoke wheels that only came with the
Sport. They were used for autocross only in C Stock and are mounted and balanced with R-compounds. Both sets of wheels are
essentially perfect, no road use, no winter salt, no curb rash, no scratches, about as close to new condition as can be. I'm
moving to CSP and will be going to wider wheels and tires.

Set #1 -- 205/50R15 Kumho V710 R-compounds, near end of life, you can use them as-is or mount your own tires. $425 for all 4
http://farm3.static.flickr.com/2186/3540630826_ac8b5b7382_b.jpg
http://farm3.static.flickr.com/2328/3540630338_8038d32549_b.jpg
http://farm3.static.flickr.com/2097/3539819103_674868f792_b.jpg
http://farm3.static.flickr.com/2026/3540628994_dde4166def_b.jpg
http://farm3.static.flickr.com/2336/3540628536_db74617f91_b.jpg
http://farm4.static.flickr.com/3297/3539817209_fb14f176f5_b.jpg
http://farm3.static.flickr.com/2153/3540648010_e47f99820c_b.jpg

Set #2 -- 205/50ZR15 Hoosier R6/SM6 R-compounds, bought as scrubs, used for autocross once. I'm willing to separate wheels
and tires if you're interested in either separately. $375 for wheels, $200 for tires, $525 for complete set mounted and
balanced.
http://farm4.static.flickr.com/3558/3582741611_52cc78a30c_b.jpg
http://farm4.static.flickr.com/3607/3582744281_37347e5ea2_b.jpg
http://farm4.static.flickr.com/3646/3583551492_fbc75306d0_b.jpg
http://farm3.static.flickr.com/2447/3582742453_f0787099db_b.jpg
http://farm3.static.flickr.com/2433/3582739827_53c564028e_b.jpg
http://farm3.static.flickr.com/2432/3583548768_7247998618_b.jpg

#7 -- Upper front control arms from '99 Miata, removed from car at 38K miles (summer car, no rust), ball joints were cut to
remove the control arm so you need to install your own. If you have a '90-04 Miata that needs bushings, you can just press
out the ball joint from your control arms and install into into these. The '99 and above control arems have more
reinforcement and are a perfect upgrade for the older Miatas. Bushings are excellent, rubber looks like new. $100 for the
pair.
http://farm4.static.flickr.com/3389/3582873703_a2147024d6_b.jpg
http://farm4.static.flickr.com/3299/3582874483_12ff7e4794_b.jpg


-- Rich
konecc at snet dot net
Vernon, CT
KoneCrusher
KoneCrusher

Posts : 44
Join date : 2008-03-07
Location : Vernon, CT

Back to top Go down

Miata parts spring cleaning Empty Re: Miata parts spring cleaning

Post  KoneCrusher Sun May 31, 2009 9:18 pm

One more:

#8 -- Eccentric alignment bolts, set of 8 bolts removed from '99 Miata at 38K (summer car, no rust). Replaced with new ones, though there's nothing wrong with these, no rust, not worn, car was only aligned 3 times with these bolts. $3 each
http://farm4.static.flickr.com/3603/3583070651_895b5f1bd7_b.jpg
http://farm4.static.flickr.com/3596/3583877690_13edb21c14_b.jpg
KoneCrusher
KoneCrusher

Posts : 44
Join date : 2008-03-07
Location : Vernon, CT

Back to top Go down

Miata parts spring cleaning Empty Re: Miata parts spring cleaning

Post  KoneCrusher Wed Jun 10, 2009 10:44 pm

All wheels and tires sold, eccentic alignment bolts sold, tie rod ends sold, open to offers on the rest.

-- Rich
KoneCrusher
KoneCrusher

Posts : 44
Join date : 2008-03-07
Location : Vernon, CT

Back to top Go down

Miata parts spring cleaning Empty Re: Miata parts spring cleaning

Post  KoneCrusher Fri Jun 12, 2009 10:10 pm

Brake pads sold.
KoneCrusher
KoneCrusher

Posts : 44
Join date : 2008-03-07
Location : Vernon, CT

Back to top Go down

Miata parts spring cleaning Empty Re: Miata parts spring cleaning

Post  KoneCrusher Sun Jun 21, 2009 9:24 am

Flyin' Miata exhaust sold, open to offers on the rest if anyone can use the stuff.
KoneCrusher
KoneCrusher

Posts : 44
Join date : 2008-03-07
Location : Vernon, CT

Back to top Go down

Miata parts spring cleaning Empty Re: Miata parts spring cleaning

Post  Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum